NICEIC certified electric shower installation, replacement and upgrades across Hampton, Richmond, Twickenham, Kingston and the M25 corridor.
Electric showers are self-contained units that heat cold mains water instantly using an electrical heating element. Unlike mixer showers that rely on stored hot water, electric showers only need a cold water supply and dedicated electrical circuit – making them completely independent of your boiler.
Modern electric showers typically range from 8.5kW to 10.5kW. Higher wattage means more powerful water heating and better flow rates, especially in winter when incoming water is colder. We generally recommend 9.5kW or 10.5kW for a satisfying shower experience.
Electric showers are ideal when:
We isolate the electrical supply and test to ensure the circuit is dead before any work begins. Your safety is our priority.
We check your existing wiring – cable size (minimum 6mm² for 9.5kW, 10mm² for 10.5kW), MCB rating, and RCD protection. If upgrades are needed, we'll explain clearly.
If required, we run new cable from the consumer unit with appropriate overcurrent protection. This ensures safe, reliable operation.
We position the shower unit in the correct bathroom zone and use IP-rated components where required. All work meets BS 7671 regulations.
We connect the cold water supply, ensuring adequate pressure and flow. If needed, we coordinate with a plumber for any modifications.
Full electrical testing including insulation resistance, earth continuity, and RCD trip times. You receive NICEIC certification and Part P compliance documentation.
Same kW rating, existing wiring suitable
From £200
Small cable/MCB upgrades required
From £350
Complete new circuit from consumer unit
From £490
* Prices are for labour and certification. Shower unit can be supplied by you or us at competitive trade prices. Chasing into walls and making good is additional if required.
Duration: Most installations take 2-5 hours depending on complexity. A straightforward replacement is typically complete within 2-3 hours; new circuit installations may take longer.
Access needed: We'll need access to your bathroom, loft (if routing cable), and consumer unit. Please ensure the shower area is clear of toiletries and we can access the consumer unit without obstruction.
Water & power off time: Cold water will be off briefly during connection (usually under 30 minutes). The bathroom circuit will be off during work – we'll restore power the same day.
Cleanliness: We use dust sheets, tidy as we go, and always vacuum up after ourselves. You won't be left with a mess.
Parking: If you have a driveway or permit for street parking, please let us know in advance. We carry tools and materials that need to be close to the property.
Get a free, no-obligation quote
Or call us directly: 07889 702799