Upstairs has power but downstairs doesn't (or vice versa)
Lights work but sockets don't
Only certain circuits are affected
Likely Causes
One or more MCBs have tripped in the consumer unit
Loose connection on a specific circuit
Damaged cable (e.g., from rodent damage or DIY drilling)
Supply fault (partial phase loss)
Overloaded circuit
Safe Checks You Can Do
Check your consumer unit for tripped switches (look for ones in the middle or down position)
Try resetting any tripped MCBs
If they trip again immediately, leave them off
Check if neighbours have power – it may be a supply issue
Call your DNO (electricity supplier) if you suspect a supply fault
When to Call an Electrician
If MCBs won't stay on after resetting, or if you can't identify the cause. Also call if power loss is accompanied by any burning smell or unusual sounds.